Polyurethane Removal by Surface Planing
A coarse finish is created on the surface after removal which provides a good bond for the new coating.
No water – as all the waste goes into bags. This means there are no blocked drains to worry about.
The result again is a fast trouble free project.
Admiralty Car Park, Queensway
Last modified on 2008-06-13 09:06:35 GMT. 0 comments. Top.
Admiralty Car Park in Queensway has had it’s fair share of PU coatings over the years. A-Pex were contracted to remove the most recent coating that had been damaged through damp seeping through the concrete floor. Upon inspection we determined that the PU that would have to removed was as thick as a car tyre.
A special type of drum was set up on the planing machines so that it could get underneath the PU and pull it upin the same way as a carpet would be pulled up.
Shotblast was used after the removal to provide an even cleaner surface with an improved bond for the waterproof membrane and coating.
100 Texaco Road Industrial Building
Last modified on 2008-06-13 09:06:42 GMT. 0 comments. Top.
Noise was a problem for the owners of the industrial building. They had tenants in the floors above and below, and since some operating 24 hours a day a noisy job was out of the question.
Over Easter 2007, A-Pex sent in a VA 30SH machine – A 300 kg hydraulically propelled floor, equipped with a special drum that shatters each tile into small pieces. By the time the neighbouring offices returned to work after the holiday the 2600m2 job had been completed.